Recently, we have received customer’s inquiry for plastic color spectrophotoemter to measure color of cable shell. The cable shell should be electrically insulated. It can ensure that the transmitted current or electromagnetic wave or light wave travels only along the wire without flowing to the outside. The most commonly seen cable shell is made by PVC, PE, XLPE,etc. The cable shell also belongs to plastic.
Today we will introduce how to measure its color with our Plastic Color Spectrophotometer CS-580.
Step 1. Prepare the spectrophotometer and cable shell samples. The customer is making the cable shell into sheet, then measure its color.
If the customer can not make the provide sheet, we can also measure the cable shell directly. If the cable diameter is large, we can put spectrophotometer on it to measure. If the cable diameter is small, it will need to be wind on a flat plate then measure. The surface should be smooth. Please refer to the following picture.
Step 2. Switch on the spectrophotometer, after calibration we can measure the sample. After measurement, we can see the test result directly on instrument screen.
Customer is satisfied with the test result and wants to purchase it. CHNSpec Tech is expert for color and gloss measurement solutions, if any inquiry for plastic color measurement, welcome to contact us.
Plastic Color Spectrophotometer for ABS Plastic Color Measurement