Plastic Color Spectrophotometer for ABS Plastic Color Measurement
ABS plastic is a terpolymer of three monomers of acrylonitrile (A), butadiene (B), and styrene (S). As a commonly used plastic, it is with excellent comprehensive performance, ABS can be widely used in electronics, electrical appliances, automobiles, construction and other fields. ABS is widely used in home appliances because of its good surface gloss and chemical resistance, toughness, hardness and good process-ability.
ABS plastic is commonly seen in our daily life. In order to make the products to have better appearance and visual effect, we will requires the plastic color uniform. Color difference is one of the defects of ABS plastic, it will greatly affect the plastic quality.
Today we will introduce how to measure its color with Plastic Color Spectrophotometer CS-580.
1. Mode: Reflectance
2. Light Source and Angle: D65/10 degree
3. Parameters need to Measure: color value CIE L*a*b and △E.
1. Prepare the instrument and samples. Do black and white calibration for the instrument.
Plastic and Spectrophotometer
2. Test the plastic target and samples. Put the target under the measurement aperture, press “test” we can see the test result directly on instrument. Press “menu” to enter into the sample measurement interface. Put sample under the aperture, press “test” , we can get the color difference between target and sample.
Test Result 1
Test Result 2
After measurement we can see the test result directly on the instrument screen. The following is the test report.
Contact Person: Mrs. Ivy Zhang
Tel: +86 18768499725